Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Torque for Banjo fitting on inlet side of Fuel Filter? 200 1988

posted by  R2 on  Tue Mar 24 22:57 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Feb 5 09:48 CST 2011
[RELATED]

I just put on a new fuel pump and filter. The inlet side of the filter is now spraying fuel and I feel it's because I didn't tighten it enough. Two trips under the car, jacking it up and letting it down is enough. Next time under I want to be right.

If you have a manual will you post the torque requirement for the banjo fitting?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Torque for Banjo fitting on inlet side of Fuel Filter? [200][1988]
posted by  R2  on Tue Mar 24 22:57 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.