Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Blowing off a Blown Head Gasket? 900 1994

I'm pretty sure my 94 940 head gasket has "issues" from the trail of deposits weeping down the left side of the block between #2 and 3# and the fact it needs a half pint of coolant every month. But there doesn't seem to be coolant in the oil or oil in the coolant, and I do have huge carbon build up from the little old lady who used cheap gas for the cars last 80,000 miles (two miles at a time and apparently a few of which she ran toasty)

So I have reasons for pulling the head since an Italian tune up isn't an option with a weak HG. But it's a good back up car for the kids and I know once I start it will take weeks to finish it since summer is my busy season. What's the down side of letting it go, puttering around town and doing the head in the fall?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Blowing off a Blown Head Gasket? [900][1994]
posted by  soundmiami subscriber  on Wed May 6 14:48 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.