Can anyone recommend a place to get said manifold in Canada for less than $300? I just fell over some 40's and think they should go great with the D cam I have. I have been following all of your posts on lifters, pushrods, springs, etc. and would like to take the opportunity to thank you all for sharing your experience.

I bought a '70 144 a few months ago with 90,000 miles and have replaced all of the front bushings, front brakes, master cylinder, brake booster, put 244 springs in the rear, cut the front and rear springs to lower a little over 2", put Mazda 16" wheels with adapters, Ipd front sway bar, and will put on the 244 rear sway bar tomorrow, adjust the valves, oil change with remote filter and Frantz bypass filter, and replace the weepy water pump (if I get to it). I am waiting on the clutch and pressure plate to swap the BW35 back out that someone put in there - the three speed truly sucks with a 4.30 rear diff!

Aaron