The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

DCOE manifold?? 140-160

Can anyone recommend a place to get said manifold in Canada for less than $300? I just fell over some 40's and think they should go great with the D cam I have. I have been following all of your posts on lifters, pushrods, springs, etc. and would like to take the opportunity to thank you all for sharing your experience.

I bought a '70 144 a few months ago with 90,000 miles and have replaced all of the front bushings, front brakes, master cylinder, brake booster, put 244 springs in the rear, cut the front and rear springs to lower a little over 2", put Mazda 16" wheels with adapters, Ipd front sway bar, and will put on the 244 rear sway bar tomorrow, adjust the valves, oil change with remote filter and Frantz bypass filter, and replace the weepy water pump (if I get to it). I am waiting on the clutch and pressure plate to swap the BW35 back out that someone put in there - the three speed truly sucks with a 4.30 rear diff!

Aaron






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.