Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Is this an R12 or R134a fill valve? 700 1990

posted by  spasske on  Mon Jun 29 09:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:11 CST 2014
[RELATED]

I am trying to figure if my recently acquired 740 has been converted yet. The accumulator has a tag the says it is good for R12 or R134a. A local guy was not familiar with the fitting. This is the high side fill valve - black volvo cap removed. The low side fitting on the accumulator has internal and external threads but no R134a quick connect adapter installed. The accumulator "looks" the same as the on in the volvo kit. Probably after market if it was converted...


--
Paul NW Indiana '89 740 Turbo 140,000






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is this an R12 or R134a fill valve? [700][1990]
posted by  spasske  on Mon Jun 29 09:49 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.