Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2014

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1992 940 Shifter Disassembly ???

posted by  Steve on  Sun Jul 5 10:24 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

My neutral start switch in my 92 940 died. To remove this, I had to pull the shifter, only to find the switch is mounted on plastic posts with palnuts. And to get it out, I have to remove the big horizontal pin holding the shifter together at the bottom. This is the shifter with two metal arms on the left side. Anybody got any clues as to how to do this? I don't have the parts diagram. It "looks" like the pin may be punched out toward the right, but try as I may it won't budge. There is also a suspicious roll pin right in the middle of the shifter that appears to hold things together.
I am tempted to break off the plastic posts and replace with screws. But if my park-lock solenoid ever goes out, I'll be back in the same spot, having to take it apart.
--
See the 700/900 FAQ at the drop-down menu above right.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1992 940 Shifter Disassembly ???
posted by  Steve subscriber  on Sun Jul 5 10:24 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.