Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

740 front sway bar bushing 700 1988

posted by  MarkyMark on  Sat Sep 5 11:14 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 17 21:34 CST 2012
[RELATED]

Fellow fanatics,

Doing my first sway bar bushing hardware replacement while hitting the struts,sway bar links, ball joints and tie rod ends.

As we all know there are various thicknesses of sway bar.

I have an 88 740 gle and was told it had a 21mm front so i ordered those.

Is the rubber bushing supposed to have a slight gap when on the bar or is it supposed to wrap around and lie flush? I don't want to force it on.

I'm thinking it should wrap flush. If gap is say 1/8 inch prior to apply the bracket is that the wrong size?

removed part# is 1273184 642 nderneath that is 6032-5.


Mark
1988 745 Gle w5spd 165k "The Silver Surfer"






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 740 front sway bar bushing [700][1988]
posted by  MarkyMark  on Sat Sep 5 11:14 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.