Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Driver's-Side Window Repair 200 1991

posted by  RepairmanJackal on  Mon Sep 7 16:27 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 10 09:52 CST 2014
[RELATED]

The driver's side window on my "new" 245 is off it's track. After disassembling the door I found the galvanized metal lift bracket had almost no gasket-material to hold and cushion the glass and that the metal bracket was bent and lacked any plastic runner material for the track/slot.

Aside from the dealer, where can I find replacement gasket/rubber material for the window glass? Can I use a black caulk?

I bent the metal bracket back into it's correct shape, but I could not find any evidence of a plastic runner/slide inside the door panel. I assume that it does not just ride on the big slot slot in the metal. The earlier model-year 740s have a runner material in there.

I've been unable to locate a donor parts car at a local pick-a-part so I'm trying to find new/aftermarket stuff when I have to.

Thanks for any info you can provide.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Driver's-Side Window Repair [200][1991]
posted by  RepairmanJackal subscriber  on Mon Sep 7 16:27 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.