Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

244 Auto won't stay in park 200 1993

posted by  Kascca on  Thu Sep 10 14:48 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 8 19:19 CST 2012
[RELATED]

I've been having a problem recently when placing the brick in park. Unless I hold the gear selector up towards the dash (as in forced into park) and then release the brake pedal (while pushing the gearshift forward) the tranny does not seem to engage fully into park. It will roll (backwards or forwards depending upon the grade) once the brake is released. Otherwise the transmission seems to run fine. Reverse, neutral and all forward gears seem to operate correctly.

I'm guessing the linkage is out of adjustment or the bushings are gone. I've already checked the fluid level and everything is fine there.

Just looking for some input that I'm on the right track in troubleshooting.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 244 Auto won't stay in park [200][1993]
posted by  Kascca  on Thu Sep 10 14:48 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.