Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2013 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230FT oil cooler adapter removal 700 1988

posted by  zrubin on  Sat Sep 12 16:56 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 20 15:45 CST 2012
[RELATED]

Trying to replace the exhaust manifold gaskets on my 1988 740 Turbo. Got the outboard oil drain line bolt removed but can't get leverage on the inboard one, got the rear manifold brace bolt out but can't get to the front one or the oil feed line bolt. Seems like the oil cooler adapter has to come out - I read the FAQ (unbolt PS pump, 32 mm socket, etc), but not clear on what to do. Do the lines to the adapter have to be disconnected? Where is the 29mm bolt that gets removed? Does anyone have any detailed instructions to get that thing out of the way or a trick to get these last 3 bolts out? I've never run into so many tool access problems as with this job. Thanks -

Zack
1980 245DL M46 295k
1988 745T+ M46 242k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230FT oil cooler adapter removal [700][1988]
posted by  zrubin  on Sat Sep 12 16:56 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.