Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Bushing instalation Charges 200

posted by  Photoman327 on  Mon Sep 14 07:35 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 1 10:29 CST 2014
[RELATED]

Sunday I change the rear sway from 23mm to 25 and the track rod to the IPD adjustable track rod with the bushing already installed. I have the adjustable torque arms as well but did not install them because I notice the center bushing needs replacing. I check the 245 and all the rear bushing need replacing. No noise but I can see they are bad. This morning I took the track rod that I took off the 244 to the machine shop to get 2 bushing pressed out and 2 new one pressed in. They did not have the right tool but had sockets that worked. My charge was $20.00. Is that what most pay to have this done? I was expecting about half that. Had I know it was going to be that I would have ordered the tools to do this myself and If I ever need it again it is here. Any thoughts?
greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Bushing instalation Charges [200]
posted by  Photoman327  on Mon Sep 14 07:35 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.