The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Bushing instalation Charges 200

Sunday I change the rear sway from 23mm to 25 and the track rod to the IPD adjustable track rod with the bushing already installed. I have the adjustable torque arms as well but did not install them because I notice the center bushing needs replacing. I check the 245 and all the rear bushing need replacing. No noise but I can see they are bad. This morning I took the track rod that I took off the 244 to the machine shop to get 2 bushing pressed out and 2 new one pressed in. They did not have the right tool but had sockets that worked. My charge was $20.00. Is that what most pay to have this done? I was expecting about half that. Had I know it was going to be that I would have ordered the tools to do this myself and If I ever need it again it is here. Any thoughts?
greg






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.