Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Side window rubber seals are malformed how do I fix. 200 1990

posted by  NewMexico240 on  Tue Sep 22 15:46 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:52 CST 2014
[RELATED]

I recently realized that both windows on the passenger side don't sit in the rubber seal like they should when the windows are closed. I don't know how they got this way the car is
fairly new to me. It seems as if the rubber seal was partially pulled out at some point and then not set in correctly afterwards, so that when the windows were closed it malformed the rubber somewhat. I have pulled out the rubber seal in the bad area to try to re-set it and it does not sit in the the grove the way it should and is cock-eyed. When I put the windows up it smashes the rubber seal into the frames grove, I don't know how long it has been this way.

Maybe if I pull the rubber seal out and set it on the glass then close the window it will set it correctly? The rubber section that is damaged is only about 6" long and located on the top center section of each of the two windows, the remaining length sits in the grove well.

Anyone ever had to deal with a simular problem.

Thanks in advance,
Joseph Segura in New Mexico





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Side window rubber seals are malformed how do I fix. [200][1990]
posted by  NewMexico240 subscriber  on Tue Sep 22 15:46 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.