Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Transmission Mount Troubles 200 1983

posted by  volvoasaurus on  Wed Oct 7 04:57 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 8 10:16 CST 2013
[RELATED]

Last week the transmission mount on my 83 245 with m46 broke and I ordered a replacement. After replacing, the transmission seemed to hit the floorpan even harder than before while cranking and the U joint on the tailshaft of the transmission hits the floorpan if I hit a large bump in the road. After inspecting it seems like my transmission went from to low with the old mount to too high with the new one. I was wandering if I could put some washers on the bolts to the crossmember to create some space or does anyone have any suggestions? Any help is much appreciated.

Joe Wood
1983 245 B23






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Transmission Mount Troubles [200][1983]
posted by  volvoasaurus  on Wed Oct 7 04:57 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.