Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Pcv Oil Separator Box Return Hose Won't Come Out! 200 1992

To start, I've got a 1992 240 sedan, manual transmission with a B230F engine. She runs great now, but has been a bit neglected (previous owners). I'm in the middle of replacing my entire PCV system, and have managed to get everything removed except the Oil Separator Box Return Hose (part can be found by going to the link at the bottom).

It's like the hose is stuck, and frankly so am I. I considered just leaving it and installing the Oil Separator Box over it, but in my attempts to remove it I've cracked the hose a bit so just leaving it as it for the time isn't much of an option.

It's in pieces now and I was hoping this wouldn't turn into an entire weekend project. I mean, there's a lot of football to be watched! Any advice would be much appreciated on how to get this brittle hose out of there.

Thanks in advance!


link to IPD: http://ipdusa.com/version.asp?strPageHistory=search&numSearchStartRecord=1&P_ID=3318&CAT_ID=0&V_ID=7864






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pcv Oil Separator Box Return Hose Won't Come Out! [200][1992]
posted by  BWiley subscriber  on Sat Oct 17 09:57 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.