Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sunroof Blues 900

uid 44536's pic
posted by  darkdelta on  Tue Oct 20 13:40 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:52 CST 2014
[RELATED]

1997 960 Wagon

Today, I tried to replace the selector gates for the sunroof. Well I got as far as the glass removal, the plastic rail that acts as a limit for the interior sliding panel, and two small clips that hold the selector gate to the rest of the assy.

I could not get the selector gate assy to come out. It appears there is no way to get the selector gate out of the track.

Also there is what appears to be a bent part on both sides, it is silver in color and has a corresponding part bent the same on the other side that is holding down the front deflector. The bent part does not move at this point, is it designed that way? I tried to post an image but, I can't find a way to do this.

The motor for the sunroof will run forward and in reverse IE: the back of the sunroof will raise and lower.

Any help will be appreciated.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.