Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Why the extra 2 screws on the golve box? 200

posted by  Nel621 on  Fri Oct 30 11:10 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 12:48 CST 2014
[RELATED]

I had to remove the glove on my 92 240 today to access the OD relay.I figured a 3 minute job tops.Low and behold the box has 2 extra screws in it.One on each side near the bottom and close to the hinges.What a royal PIA that was.The screw could not be reached with any screw driver except for one with a 90 degree bend in it,good thing I had one.But a 3 minute job turned into almost a 30 min. nightmare.I could only turn the screw maybe 1/4 turn at a time.Needless to say I did not reinstall these.Who came up with that geat idea?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Why the extra 2 screws on the golve box? [200]
posted by  Nel621 subscriber  on Fri Oct 30 11:10 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.