Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A wiring repair question. 200 1989

posted by  Darius S on  Wed Nov 4 06:57 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 3 21:24 CST 2013
[RELATED]

Hi All,

I have an 89 240 wagon that has been stalling randomly recently. I've sucessfully tracked the stall down to lack of spark due to a faulty blue wire between the distributor and the computer next to the passenger side wheel well. I'm sure some of you are familiar with the big plug that contains 8 or 10 wires that this blue wire is part of. It's pretty clear that because the blue wire is a bit longer than the others, it has kinked and I'm losing signal between the distributor and the computer. When the car stalls, it won't restart until I jiggle this kinked section of the blue wire. I need to figure out how to remove/replace this damaged section of wire, but I'm not sure if I'm able to remove it from the plug and replace the wire individually. Anyone else have experience with this one?

Darius






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A wiring repair question. [200][1989]
posted by  Darius S  on Wed Nov 4 06:57 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.