Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

High Idle 200 1993

Yesterday I cleaned the AMM with CRC cleaner, and didnt touch anything inside it. Also cleaned again the TB with new gasket, but I cant seem to get the TPS set right. Now I have a constant high idle (no hunting).

If the TPS is not set right would it case a high idle and the code below? I also checked the tube from the AMM to the TB and there are no leaks.

Would this cause my current 121 fault (Faulty signal to/from Air Mass Meter)?

The only three items touched were the AMM, TB and the TPS.

Thanks
Frank






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New High Idle [200][1993]
posted by  fpeck1948 subscriber  on Mon Nov 9 22:56 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.