Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bend my upper door corner back 200 1989

posted by  someone claiming to be John1989 on  Wed Nov 18 15:12 CST 2009 [RELATED]

Hi,
My driverside upper door corner is bent outwards and is leaking air, sound and water. It's probably about 4-5 inches in both direction that is not flush with cabin. The gap is 1/2 an inch at the most. My first thought is to put a piece of wood at an angle between the post in between the doors and the roof and bend the corner ( with the window down) of the door against it. Good or bad?

John





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bend my upper door corner back [200][1989]
posted by  someone claiming to be John1989  on Wed Nov 18 15:12 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.