Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My heater questions 200 1990

posted by  Mark Lundell on  Wed Nov 25 13:53 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 14 21:34 CST 2014
[RELATED]

1. Is there a vacuum activated baffle in the heater area which keeps the air away from the heater core, or is the heat totally controlled by the heater valve?

2. Is there "simple" way to back-flush the heater core? Since I still have the areas open, I was thinking of attaching long hoses to the intake and output by the valve itself.


3. How do I get to the activator for the driver's side defrost vent? Is it behind the instrument panel?

I just replaced the valve and still have no heat. The floor, middle vents, and one of the defrost vents are working. I checked the valve before I put it in. I suspect the heater core because one of the hoses gets only slightly warmer than the other.

1990 240Dl






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New My heater questions [200][1990]
posted by  Mark Lundell  on Wed Nov 25 13:53 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.