Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Trouble installing rear Bilstein HD's-91 940 SE Wagon 900 1991

posted by  Sarki on  Sat Feb 20 11:39 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 7 05:39 CST 2014
[RELATED]

Hoping someone can give some helpful tip on this. I reviewed the rear shock installation on FAQ but still having problems fitting the upper portion of the shock as it just won't fit inside the upper mount opening in the wheel well. The shock came with thick rubber bushings that mount on each side of the ears-2 on the upper ear and 2 on the lower ear. The shock I removed, not a Bilstein, did not have any rubber bushings on the ears. If I removed the rubber bushings it appears to fit inside the upper mount. This is making me crazy as I've tried several different methods of getting it in there. Any tips on compressing this bad noy as well to make things a bit easier?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Trouble installing rear Bilstein HD's-91 940 SE Wagon [900][1991]
posted by  Sarki  on Sat Feb 20 11:39 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.