Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

grinding metal after moving a couple feet in reverse 200 1988

posted by  shmule05 on  Mon Mar 29 16:37 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 6 20:46 CST 2013
[RELATED]

I have a manual 245 wagon with 136K.

Recently about once every ten times I put my Brick in reverse I move a couple of feet and then all of the sudden there is a super loud clunk/grinding metal noise from the rear wheels and the car stops moving. It happens both on flat ground and while backing up on an incline.

I then put the car in first gear and it drives off like nothing happened. Very perplexing.

Just by the sound of the clunk/grinding metal I feel like it might be doing some serious damage to a number of different components in the rear of the car.

Initial searches on the forum leads me to believe something loose within the rear bearings or brakes or possible the UV joint.

Not sure what the easier way is to test and isolate the problem, without doing some serious surgery to the rear of the car. Any thoughts?

Cheers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New grinding metal after moving a couple feet in reverse [200][1988]
posted by  shmule05  on Mon Mar 29 16:37 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.