Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Swapping early b230ft from my 86 740T with 90+ b230ft 700 1986

posted by  The Twin on  Tue Apr 27 08:30 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 2 06:28 CST 2010
[RELATED]

*JUST the engine.

Please tell me this will be more or less a direct bolt on swap.
I don't want to start headaching about wire harnesses, and PCM's and sensor issues...

goal is to be able to push more boost thru my engine, and will only accomplish this with the thicker 13mm rods the 90+ engines have as opposed to the current flimsy 8mm rods...

has anyone done this?

cheers
-R






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swapping early b230ft from my 86 740T with 90+ b230ft [700][1986]
posted by  The Twin  on Tue Apr 27 08:30 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.