Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A plug for Vinyl X 120-130

All of the vinyl and rubber parts were showing their 43 years of sun. The seats were hard, especially the rear, and the rubber was hard as plastic and brittle.

I thought I would give Vinyl X a try. Absolutely amazing! The seats now feel like leather, soft and flexible, even the top of the rear seat. It also cleaned the surface somewhat, so that it looks much better. No more kick marks on the door panels.

The rubber parts became flexible. Well, most of them anyway. The window scrapers are probably too far gone.

I used a small old wash cloth, to clean and apply. I even sprayed the mesh insert in the seats and rubbed off years of dirt. Let it dry and buff off the residue.

There is a little shine, so beware of the dash, but nothing like the god awful Armorall.

I found it by ordering it at the local ACE hardware, they also sell Lexol leather conditioner.

Klaus
--
Why are Volvos so endearing? Its just a car.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A plug for Vinyl X [120-130]
posted by  KlausC subscriber  on Tue Jun 8 15:24 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.