Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

power window motor dead? 200 1992

posted by  cn52x5hg on  Sat Jun 19 13:12 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 11 17:37 CST 2013
[RELATED]

My front passenger power window does not work locally or from the driver door. With the igntion at KPII I have 12V on the yellow lead at the passenger door. I have continuity from the passenger door switch to the power window motor on both leads. When I depress the switch and take a voltage measurement where the power input leads are soldered to the motor, I see about 6V (not 12v ?!).

I ran this test with two different switches in the passenger door to rule out a problem with the switch. The motor seems to make some faint clicking noises and sometimes sounds like its trying to do something when the switch is depressed. Finally, when I take a resistance reading across the input terminals into the power window motor, I get about 1.3 ohms.

Is there an expected resistance of the power window motor?

Does it sound like this motor is dead?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New power window motor dead? [200][1992]
posted by  cn52x5hg subscriber  on Sat Jun 19 13:12 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.