Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Upper timing belt cover question; camshaft seal 200 1993

posted by  mr.zorak on  Sun Jul 4 12:45 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 3 10:08 CST 2014
[RELATED]

I have a little oil on top of the new water pump and I want to inspect my camshaft seal. The new seal was put in when the timing belt/water pump job was done a couple of months ago. I realize there are 3 bolts holding the upper cover on. I removed them, yet I could not get the cover to come off and I certanly did not want to force it. My question is: does this cover come off without removing the fan/shroud/etc or is the only way to peek in behind there to pull all this off?
--
93' 240 Classic Wagon 220K & 92' 740 Wagon Regina/Rex 90K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Upper timing belt cover question; camshaft seal [200][1993]
posted by  mr.zorak subscriber  on Sun Jul 4 12:45 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.