Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 Glovebox Removal - HOW? 200 1993

posted by  RicoS on  Mon Jul 5 17:54 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 02:18 CST 2014
[RELATED]

I've repaired enough 240 glove boxes broken at the hinges to wonder why The Volvo engineers didn't come up with a better design. Well, on the '93 I'm working on they did by running screws at each hinge vertically into the metal of the dash. Now, after spending way too long with an offset screwdriver I have to wonder why they made this improvement so hard to access.

Does anyone know if there is some why to pop the glovebox door supports (without breaking them, of course) in order to open the door fully so that there is a straight shot at these two screws?

Rich






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1993 Glovebox Removal - HOW? [200][1993]
posted by  RicoS  on Mon Jul 5 17:54 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.