Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2019 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AC compressor wiring question 900

posted by  sasjzl on  Thu Jul 29 03:21 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 17:24 CST 2014
[RELATED]

Hi all,

Question on AC compressor wiring. The compressor that is in my 1996 960 had the two wires at the back clipped off. Not surprisingly that compressor is not working. Even if I jump directly to the battery it does not work. I got a compressor at the junkyard and it looks like those two wires are pretty important and work with the wire that comes from the front of the compressor. My questions are:

- Is the entire compressor electrically connected only through that one thin green/yellow wire?

- What do the two wires coming out of the back do?

- Is there any obvious reason why someone would clip those two wires in the back off and leave the wire from the front connected?

Another AC related question I have is about putting the system back together after replacing the compressor, drier and orifice tube. Is it correct to put about 6 ounces of PAG150 oil in both the compressor and the drier before buttoning everything up?

Thanks very much,
Jim Lee






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AC compressor wiring question [900]
posted by  sasjzl  on Thu Jul 29 03:21 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.