Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help. Engine won't start after changing temp sensor. 200 1993

posted by  AlanK on  Sat Jul 31 13:42 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 16 08:03 CST 2014
[RELATED]

I was getting the code that the engine temp sensor was not sending the correct signal so I installed a new one. In order to get in I removed the throttle body and the 3 hoses to the intake manifold (above the throttle body). After reassembly, the engine cranks but will not start. I have spark and I can smell fuel on a plug when pulled (though it is not wet). The cable to the throttle body is plugged in, as is the temp sensor and the AMM.

What did I do?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help. Engine won't start after changing temp sensor. [200][1993]
posted by  AlanK  on Sat Jul 31 13:42 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.