Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 Windshield Seal Replacement 200 1985

posted by  Antiriad on  Tue Aug 24 12:41 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 27 09:36 CST 2011
[RELATED]

I recently found out that the Windshield Seal of my 85' 240 on the bottom left side doesn't stay flat to the body frame which allows water to drip on the driver's side foot well area through a 2mm gap.

I know allot of people are recommending the "Newer" seal but I would like to keep the chrome trim of my current Model/year if possible. Here are my questions.

1. Can I have a Glass replacement Store reseal the Windshield without having to Upgrade to the newer style and also by having the no-leak guarantee? Do they have to install new clips?

2. Is the upgraded clip-less seal going to replace the Chrome trim or it goes underneath it? Will the Windshield store be able to obtain the newer seal or where can I find it before hand If I have to find it on my own?

3. Is the Newer seal better than the Older style seal. Some people have mentioned that wind noise is reduced.

Any recommendations regarding the dilemma of repairing vs replacing the seal with the newer style?

Thanks

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 Windshield Seal Replacement [200][1985]
posted by  Antiriad  on Tue Aug 24 12:41 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.