Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2013 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head Swap WIN!!!! 700 1992

posted by  raidman on  Thu Jan 13 19:17 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

Finally discovered the cause of the no-start after head swap...the drive cog on the distributor that I rebuilt last year. I installed it 180 degrees out of synch. I removed the offending distributor, drove out the pin with a tapered drift ( as per the FAQ's),rotated the shaft 180 degrees...then disaster hit. One of the fabric washers decided to disintegrate and I was going to be stuck with a wobbling shaft (not good). Luckily I had an extra Bosch 2.2 distributor that I was able to cannibalize for the correct washer, but also the more free drive cog and pin. After installation, Inga started on the second crank and has run perfectly since...no more clattering and clanking of the engine on start up.
Should I pitch the OEM head or try to refurnish it? I imagine it will take a new set of cam spacers to stop the diesel like clanking on startup.
Is it worth the trouble?
Thanks,
el raidman







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.