Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B20F headgasket leak 140-160 1968

posted by  Momo Nagoda on  Tue Jan 18 13:43 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 28 18:14 CST 2014
[RELATED]

Just had a new head gasket installed in 68-142 and now showing the beginning of same leak (after less than 200 miles)-more when cold and under load and less as engine warms. Indy mechanic is competent but not volvo experienced. IPD Elring gasket used which Indy says normally does not need retorque (before I took delivery).
Am looking for suggestions before I return to him with the bad news.
Should I have installed new head bolts?
Chased the threads?
Increased the torque load?
Or can this be cured by re-torquing the head?
TIA





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20F headgasket leak [140-160][1968]
posted by  Momo Nagoda  on Tue Jan 18 13:43 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.