Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PV544 carb/manifold gaskets/insulator 444-544

posted by  Greynold on  Wed Feb 2 10:32 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 4 20:24 CST 2012
[RELATED]

The carb/manifold connection is different between a '58 PV parts car and my '60 PV driver. The '58 seems to have a thinner phenolic insulator between two conventional gaskets. The '60 has a thicker insulator made of a rubbery material between the two conventional gaskets. The latter is fastened to the manifold bolts with spring-loaded nuts. The '58 is fastened normally with only nuts and lockwashers.
Available parts listings don't refer to the rubber gasket with springs under the nuts. Is this perhaps a mod made by a previous owner or a feature with a short production run? Are the two systems interchangeable?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PV544 carb/manifold gaskets/insulator [444-544]
posted by  Greynold  on Wed Feb 2 10:32 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.