Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 ABS Light 200 1992

posted by  Dan Marino on  Sat Feb 12 07:01 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

Hi All,

This past week my ABS light came on in the 240. I thought, no big deal, the sensor magnets must have a bunch of crud on them. It's happened to me before after we get a heavy snow fall with lots of salt and sand on the roads.

So yesterday I pulled the front wheels and rotated the tires while I was at it!

Anyway, I removed the calipers and front rotors and the magnet sensors were loaded with crud. The sensor wheels on the hub were caked with grime too, so I cleaned it all up on both sides.

Started the car and the ABS light was off. As soon as the car started rolling the ABS light came back on.

Any other suggestions for me?

Thanks to all.

Did I mention that Chad Henne stinnks?

13






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 ABS Light [200][1992]
posted by  Dan Marino  on Sat Feb 12 07:01 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.