Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Reverse light switch (M47) - What type of electrical connectors fit to it? 200 1992

posted by  Jakeinthebox on  Thu Mar 10 00:25 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 9 22:23 CST 2013
[RELATED]

What kind of electrical connectors fit on the reverse light switch on my manual transmission? I need to make a new wiring harness - the old one was broken in half Monday, temporarily duct taped together yesterday and gone this evening. I probably routed it stupidly, it caught in the drivetrain and was yanked off and is now somewhere on the side of the road. Brilliant, I know.

Any tips on routing the wires for the minimum of interference and wear? I'd also like to know the best spot to connect to the remaining wires once inside the car...I am guessing under the carpet between the shift boot area and the far right of the driver's side foot well?

Thanks all! Hopefully I'll have reverse lights again soon.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Reverse light switch (M47) - What type of electrical connectors fit to it? [200][1992]
posted by  Jakeinthebox  on Thu Mar 10 00:25 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.