Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Strut Insert Change On the Ol' 240 200 1993

posted by  loose_moose on  Thu Mar 17 16:32 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 6 11:51 CST 2013
[RELATED]

Strut nut in my 93 240 is larger than the 15/16ths that was in my V70. Can anyone tell me what size it is. I will head to Sear's and buy a large wrench with an offset head that I will only use every couple of years.

Also, do you really need to take apart the ENTIRE hub assembly just to replace the insert and mount plate? I was studying this the other day (after I'd gotten the wheels off and didn't have correct size wrench!) and it looks to me like it could be done this way...

1. Jack up car and take off the tires
2. Loosen strut nut
3. Support hub and compress spring
4. Remove strut nut, the mount plate
5. Pull out the old strut
6. Reverse

Please let me know if my process engineering seems logical because it sure looks alot less time consuming.

Thanks,
Loose Moose






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Strut Insert Change On the Ol' 240 [200][1993]
posted by  loose_moose  on Thu Mar 17 16:32 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.