Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

starter to solenoid connection 200 1989

posted by  B0RK ^3 on  Sat Apr 30 13:41 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 18:09 CST 2014
[RELATED]

A no start condition got me all the way to the starter (which I removed).

The braided wire between the starter and the solenoid was hanging on by one thread. It is now an open circuit. It's most likely the culprit. Here is where I need advice. How can I bridge the gap (open) with a terminal (solenoid) on one end and a rusty braided wire from the starter? Can the braided wire be saved? Can I avoid a trip to the parts store? Has any one fixed this before?

Ray Schwabe


Delafield, WI

schwaberay@yahoo.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New starter to solenoid connection [200][1989]
posted by  B0RK ^3 subscriber  on Sat Apr 30 13:41 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.