Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1986 744 Turbo M46 Shifting Problems 700 1986

I have a 1986 744 Turbo with the M46 transmission. Driving home from work one day, the transmission just stopped going into first and second gear. I made it home in the car in third and parked it. Recently I took the boot off to get down to the shifter linkage/ball socket, and removed the snap ring and upper ball socket bushing. If I pull the shifter out a little and mess with it enough, I think I can feel it go into second , but I still do think I have found first. The car still goes into reverse, third and fourth just fine. Any ideas? Could it possibly just be the shifter linkage / bushings? If so, is there anything I can do short of pulling the transmission out of the car?
--
1986 744 Turbo, 1990 744 GL, 1992 965






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1986 744 Turbo M46 Shifting Problems [700][1986]
posted by  KASarich  on Mon May 2 09:41 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.