Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

J-type overdrive valve body differences 120-130

posted by  malloy1 on  Sun Jun 19 09:49 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 17:44 CST 2014
[RELATED]

Were there 3 or 2 different valve bodies designs? I see '76 to June '83 and May '83 to '93, but what about before '76?

Is the relief valve the only difference? Are the parts interchangeable (Can you put any year relief valve assembly into any year valve body)? Are all the O-rings interchangeable?

I remember a couple of years ago using two overdrive units to make one good unit, and the valve body I used was from a later ('76-'83) OD unit, and I mixed it with an earlier (pre-76) OD unit. The unit works perfectly to this day (M41).

Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New J-type overdrive valve body differences [120-130]
posted by  malloy1  on Sun Jun 19 09:49 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.