Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

manual window regulator - broken? missing screw? just bent? 200 1983

posted by  jomarex on  Mon Jun 20 20:24 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 5 11:56 CST 2014
[RELATED]

My manual driver's window was getting stuck at the top when I tried to roll it down (undoubtedly because I've long been in the habit of quickly rolling it up and not slowing down until it crunched into the top of the door...), then it finally just broke loose and the glass fell down inside the door. Took the regulator out, but don't know what I'm looking at.

I assume this is supposed to be all attached together? Don't see any threads on the back side of that big screw looking thing on the short part. That top tooth on the curved part is bent; can I just bend it back?


Photobucket




Photobucket


Photobucket





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New manual window regulator - broken? missing screw? just bent? [200][1983]
posted by  jomarex subscriber  on Mon Jun 20 20:24 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.