Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tranny Mount Welded Nut Broke Loose! 900

posted by  tvpierce on  Mon Jul 4 08:53 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 8 06:40 CST 2014
[RELATED]

I'm replacing the Rear Main Seal on my '93 945T.

One of the nuts that's welded to body that secures the transmission mount broke free when I was removing the bolt. I was able to cut the bolt out with Sawzall and metal blade... but now will only have three of the four mounting points for the tranny mount.

I think it would *probably* be secure enough with just three bolts, but would like to repair/replace the broken one if possible. I have a good AC/DC stick welder, but don't think I could get a decent bead welding upside-down. (a more experienced weldor would be able to do it with the right equipment, but I'm not a very experienced, and I don't have MIG or TIG.)

Any thoughts on a solution?

Also, any thoughts or experience on simply running it with only three of the four mounting bolts?


Thanks in advance.

jp
--
Jeff Pierce (Post back with your results... it's what makes this forum work.)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tranny Mount Welded Nut Broke Loose! [900]
posted by  tvpierce  on Mon Jul 4 08:53 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.