Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Slop in Linkage 200

posted by  r2grom on  Mon Jul 4 14:55 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Nov 24 23:09 CST 2012
[RELATED]


Good Afternoon Group,
I replaced the transmission mount yesterday on my 82 GLT Automatic. The mount was trashed and the fix did a lot of good towards removing a lot of vibrations
under the shifter. While I was under the car I did a bit of clean-up on the shifter linkage and bushings. I did find that the linkage at the bottom of the shifter did seem very loose and would like to ask how loose the rivited section
(link to picture below) should be ??? Should it be set solid or should there be a bit of free play in the rivit??

Thanks for the help,

John I.




http://photoshare.shaw.ca/image/3/f/4/203691/screenhunter_001-1.jpg?r=t






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Slop in Linkage [200]
posted by  r2grom  on Mon Jul 4 14:55 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.