Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

67.5 Driveshaft in a 66? 120-130

posted by  malloy1 on  Fri Jul 8 17:21 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 17:44 CST 2014
[RELATED]

I'm collecting parts for an M41 install, and I have some driveshafts for the later style with the big rubber donut center support (and the half-circle bracket/spring/washer).

I heard it can be done, but can't remember what it takes. Is as easy as drilling some holes for the center support bracket? Is it a better system?

Paul

I just looked at the two driveshafts I have. One is a 67.5 from a 122/M40 combination and one from a '74 144/M41. The rubber support is different size, so I guess I have to use the '67.5 122 rubber support/bracket, but can I use the front shaft from the 144?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 67.5 Driveshaft in a 66? [120-130]
posted by  malloy1  on Fri Jul 8 17:21 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.