Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Unusual Cylinder Head???? 120-130

posted by  jerry122 on  Sat Jul 9 15:50 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 9 15:23 CST 2011
[RELATED]

I have two cylinder heads, a '71 "E" FI head and a B20 cylinder head. The carb head looks like the FI head but not drilled for the injectors (looks like they just have to be drilled out); there is no part number cast into the carb. head. Between the 6 and 7th valve, under the rocker arm is a raised plate that has "5" and "816" below and "7" with "SAG" below the 7. It is a big valve head with a cleaner intake port design than the FI head. It is about 1/8th inch thicker than the FI head. HELP HELP HELP what do I have here?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Unusual Cylinder Head???? [120-130]
posted by  jerry122  on Sat Jul 9 15:50 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.