Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Make my own flame-trap relocation kit... need 1 piece of hose? 200

posted by  Will740turbo on  Wed Jul 20 01:06 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 16:09 CST 2014
[RELATED]

Hello. I took a look at my flame trap and where it's located the other day.

Looks like the tube out the top of the oil trap/breather box is cracked. I want to relocate it to above or flush with the manifold, and to replace the tubing. I could spend the $18 on a kit, but it looks like I can just buy some heater (or oil resistant) hose for $5 and use that.

Does anyone know the correct ID for the riser tube and the tube to the intake? Looks like about 3/4-1" to me, or 20-25mm.

Cheers!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Make my own flame-trap relocation kit... need 1 piece of hose? [200]
posted by  Will740turbo subscriber  on Wed Jul 20 01:06 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.