Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

External Temperature Illumination Lamp replacement 900 1995

posted by  JWT on  Thu Aug 25 13:13 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 4 20:13 CST 2012
[RELATED]

Having found much useful information on this site over the years I thought I would pass along information on a tool I made in order to change the illumination lamp for the external temperature indicator in the guage cluster of my 940. Due to the location of the lamp it is impossible to replace it using just fingers. I made the tool out of a piece of aluminum about 1mm thick. I would recommend that you buy the replacement lamp (Volvo# 989806) before making the tool as you want a friction fit between the lamp and the tool to aid in installing the new lamp. However I can't figure out how to attach a copy of the drawing I made of the tool.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New External Temperature Illumination Lamp replacement [900][1995]
posted by  JWT  on Thu Aug 25 13:13 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.