Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

740 brake question 700

posted by  jobrated on  Mon Sep 5 10:06 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 26 15:42 CST 2011
[RELATED]

Howdy,
I have a frozen caliper so I'm going to do a brake job on my 91 740 wagon abs
my question is the brake hose that goes to the caliper is mated to
a 1 inch or so metal fitting that is on the caliper, do I disconnect the brake hose from that fitting, take it off from the caliper?
will the new calipers come with that fitting?
It also seems like I read about using 11mm wrench but my fittings are more
like 14-15mm
I probably drove about 7 miles under 40 mph with the caliper frozen, I just
had the front pipe put in and thought the smell was the new exhaust...
did this damage the rotors? I ordered to new calipers and pads, wondering if I should just get the rotors too, the brakes seemed great before it froze.
thanks in advance for you time and suggestions
regards,
pat
Cleveland OH






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 740 brake question [700]
posted by  jobrated  on Mon Sep 5 10:06 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.