Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

New Nissen radiator has no hole for fan sensor 900 1993

posted by  Schumi1 on  Thu Dec 1 17:04 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 16 09:52 CST 2014
[RELATED]

Hello all,
I ordered a new Nissen radiator from FCP for my 940 "Regina". It arrived today (speedy delivery as always).
I mentioned to the sales rep that it must have the hole in the top right (passenger side) side and the grommet for my fan sensor. He said this was the correct fit and sent it.
It did come with a little baggie with a plastic fitting and what appears to be a new rubber grommet. But on the tank side where this sensor goes is just a very small hex shaped plastic nub molded into the spot where the sensor goes. How am I supposed to insert the sensor ? I have the "push in/press fit" style that goes into the grommet. Break off the nub and drill out the plastic ? Seems like one would need a pretty big bit to make it the size of the grommet....
Suggestions ?
Thanks,
Schumi 1






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New New Nissen radiator has no hole for fan sensor [900][1993]
posted by  Schumi1  on Thu Dec 1 17:04 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.