Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Best Order of Dis/Re-assembly (tie rod, ball jnt, sway bar link, control arm bushing) 900

posted by  GSP on  Tue Mar 6 17:40 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Mar 15 23:40 CST 2014
[RELATED]

Just letting the penetrating oil soak in, so thought I'd ask:

Replacing ball joints, outer tie rod ends, control arm bushings, and sway bar links. What is the preferred order of doing these tasks. I've done a ball joint before, but thought I'd ask for any wisdom that will make things go easier.

cheers,
Brent














--
GSP in Chilliwack, BC, Canada






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Best Order of Dis/Re-assembly (tie rod, ball jnt, sway bar link, control arm bushing) [900]
posted by  GSP  on Tue Mar 6 17:40 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.